Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Head separation on my brass
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="montana west" data-source="post: 2324468" data-attributes="member: 113504"><p>IF you do not handload then Spalidi is completely right . However the 280AI is a wildcat and I have owned two of the 280AI and no headspace problems, but in my 45 years of working with wildcats not all reamers are the same. If you ;hand load then my remedy will work fine and if not then you ;need a good gunsmith to set your barrel back to the no go gauge for the 280 remington which is 1mm longer than a 30/06 and a 270 win. However the 270 is a 64mm case but the length is in the neck and not the sholder, so do not use 270 brass in a 280.</p></blockquote><p></p>
[QUOTE="montana west, post: 2324468, member: 113504"] IF you do not handload then Spalidi is completely right . However the 280AI is a wildcat and I have owned two of the 280AI and no headspace problems, but in my 45 years of working with wildcats not all reamers are the same. If you ;hand load then my remedy will work fine and if not then you ;need a good gunsmith to set your barrel back to the no go gauge for the 280 remington which is 1mm longer than a 30/06 and a 270 win. However the 270 is a 64mm case but the length is in the neck and not the sholder, so do not use 270 brass in a 280. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Head separation on my brass
Top