Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Harmonics problem....(I think) Ideas??
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Capt RB" data-source="post: 1507326" data-attributes="member: 85987"><p>Bell and Carlson use a bedding block in their stocks. Your smith should not have put pillars in it for starters. Check your fore end to make sure your not touching the barrel channel while in the shooting position. Meaning if you use a bipod or use bags check with the dollar bill. If it is really close you may have the barrel contacting due to whip as the bullet is still in the barrel during firing.</p><p>Why would you float the tang? If you had a skim bed done correctly it creates a longer surface for greater stability when done.</p><p> Check to make sure no ceracote got on the lug surfaces, Check the bore and crown also.</p><p> Check to make sure your firing pin fall was not changed when the bolt was stripped to be coated. If put together wrong the pin will move in and out due to the lock washer not being in the correct orientation. Or may be short making inconsistent ignition due to lack of force. This sounds like it may be the issue if everything else checks out</p></blockquote><p></p>
[QUOTE="Capt RB, post: 1507326, member: 85987"] Bell and Carlson use a bedding block in their stocks. Your smith should not have put pillars in it for starters. Check your fore end to make sure your not touching the barrel channel while in the shooting position. Meaning if you use a bipod or use bags check with the dollar bill. If it is really close you may have the barrel contacting due to whip as the bullet is still in the barrel during firing. Why would you float the tang? If you had a skim bed done correctly it creates a longer surface for greater stability when done. Check to make sure no ceracote got on the lug surfaces, Check the bore and crown also. Check to make sure your firing pin fall was not changed when the bolt was stripped to be coated. If put together wrong the pin will move in and out due to the lock washer not being in the correct orientation. Or may be short making inconsistent ignition due to lack of force. This sounds like it may be the issue if everything else checks out [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Harmonics problem....(I think) Ideas??
Top