Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Hammer Hunter Load Data, (See page 1, Post 8)
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="JTH" data-source="post: 2266468" data-attributes="member: 59647"><p>My Sherman 7Max arrived last week and I'm finally getting a start on load development. It's got a 26" Proof Research Sendero barrel, 1in 8.44 twist, and a suppressor. Incidentally, I've been testing loads with and without the suppressor and not seeing any differences in speed or pressure, but POI usually changes. Using ADG brass and Fed 215 primers. Coal on this load was 3.05 Powder is H4831SC. Shooting the 131 grain hammer hunter, worked up to a slightly compressed load of 72.0 grains with a slight ejector mark and moderate bolt lift. It's running 3,541 FPS with that load. I'm going to back it down a bit and start playing with seating depth (make them jump a little more). Groups are sub moa but I know its capable of better.</p><p></p><p>I've also got some 120 Hammer hunters to try as well, will post results when I have them.</p></blockquote><p></p>
[QUOTE="JTH, post: 2266468, member: 59647"] My Sherman 7Max arrived last week and I’m finally getting a start on load development. It’s got a 26” Proof Research Sendero barrel, 1in 8.44 twist, and a suppressor. Incidentally, I’ve been testing loads with and without the suppressor and not seeing any differences in speed or pressure, but POI usually changes. Using ADG brass and Fed 215 primers. Coal on this load was 3.05 Powder is H4831SC. Shooting the 131 grain hammer hunter, worked up to a slightly compressed load of 72.0 grains with a slight ejector mark and moderate bolt lift. It’s running 3,541 FPS with that load. I’m going to back it down a bit and start playing with seating depth (make them jump a little more). Groups are sub moa but I know its capable of better. I’ve also got some 120 Hammer hunters to try as well, will post results when I have them. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Hammer Hunter Load Data, (See page 1, Post 8)
Top