Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Glass bed modeling clay
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="mullmann03" data-source="post: 2904736" data-attributes="member: 60122"><p>I thought I got my action stuck today. I used the release agent provided in the pro bed 2000 kit and it did not work very well. I finally got it loose and some of the bedding stuck to the sides of the lugs. I will get a different release agent before I do anything else. The epoxy worked well though. I had to sand down in front of the recoil lug to free float the barrel but it fits well and holds the action in upside down. I am going to try the tang area today. The small recoil lug area was a good test for my first time.</p></blockquote><p></p>
[QUOTE="mullmann03, post: 2904736, member: 60122"] I thought I got my action stuck today. I used the release agent provided in the pro bed 2000 kit and it did not work very well. I finally got it loose and some of the bedding stuck to the sides of the lugs. I will get a different release agent before I do anything else. The epoxy worked well though. I had to sand down in front of the recoil lug to free float the barrel but it fits well and holds the action in upside down. I am going to try the tang area today. The small recoil lug area was a good test for my first time. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Glass bed modeling clay
Top