Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Epoxy in recoil lug
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="JDD" data-source="post: 2391692" data-attributes="member: 102774"><p>There is only one thing worse than a un bed rifle , one that was done in a half *** manner! The plastic stocks as you have found out are not the end all of rifle design. </p><p></p><p></p><p>A you will need a release agent . A good wax too coats with time to dry between first and second , a light spray with furniture wax or Pam may also hedge your bet applied in addition to the paste wax . Use play do to fill all crevices you don't want jb weld to seep! The mag well of the reciever , the mag cut out of the stock ! Remove the trigger group fill the area with playdo! Spray and wax the reciever but not the recoil lug. You want it to stay in the stock. But two long bolts that match your reciever bolts and cut off the heads 6" long wax them good put heat shrink on them other than the depth they screw on. </p><p></p><p>De grease the inside of the stock Ruffin were you will glass I suggest fully glass the reciever the recoil lug and the chamber area of the barrel. You should have a 1/2 moa rifle or better when done</p></blockquote><p></p>
[QUOTE="JDD, post: 2391692, member: 102774"] There is only one thing worse than a un bed rifle , one that was done in a half *** manner! The plastic stocks as you have found out are not the end all of rifle design. A you will need a release agent . A good wax too coats with time to dry between first and second , a light spray with furniture wax or Pam may also hedge your bet applied in addition to the paste wax . Use play do to fill all crevices you don’t want jb weld to seep! The mag well of the reciever , the mag cut out of the stock ! Remove the trigger group fill the area with playdo! Spray and wax the reciever but not the recoil lug. You want it to stay in the stock. But two long bolts that match your reciever bolts and cut off the heads 6” long wax them good put heat shrink on them other than the depth they screw on. De grease the inside of the stock Ruffin were you will glass I suggest fully glass the reciever the recoil lug and the chamber area of the barrel. You should have a 1/2 moa rifle or better when done [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Epoxy in recoil lug
Top