Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Epoxy in recoil lug
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="MagnumManiac" data-source="post: 2390695" data-attributes="member: 10755"><p>On CZ 550 Safari Magnum actions, they have a second recoil lug that sits very loose in the stock, it's called an 'F' block and is steel. Then behind that is a sliding nut that a second (actually third screw) recoil lug screw attaches the barrel to the stock.</p><p>When the stock is removed, that little screw and second recoil lug are free to fall out and bounce across the floor!</p><p>So, using a minimal amount of Devcon 10110, I bed that second lug in place, makes disassembly and reassembly so much easier. To remove one of these, it is best to use a soldering iron directly in the part and wait until the bedding compound softens, then tap the part to remove it, prying the part is a bad idea.</p><p>You can do the same, just make sure you don't use too much Devcon and put release agent ALL OVER the barreled action.</p><p>Do not allow the Devcon to go more than halfway up the sides of the recoil lug if you want to be able to remove it later, if it does, it may lock it in place permanently…ask me how I know this.</p><p></p><p>Cheers.</p></blockquote><p></p>
[QUOTE="MagnumManiac, post: 2390695, member: 10755"] On CZ 550 Safari Magnum actions, they have a second recoil lug that sits very loose in the stock, it’s called an ‘F’ block and is steel. Then behind that is a sliding nut that a second (actually third screw) recoil lug screw attaches the barrel to the stock. When the stock is removed, that little screw and second recoil lug are free to fall out and bounce across the floor! So, using a minimal amount of Devcon 10110, I bed that second lug in place, makes disassembly and reassembly so much easier. To remove one of these, it is best to use a soldering iron directly in the part and wait until the bedding compound softens, then tap the part to remove it, prying the part is a bad idea. You can do the same, just make sure you don’t use too much Devcon and put release agent ALL OVER the barreled action. Do not allow the Devcon to go more than halfway up the sides of the recoil lug if you want to be able to remove it later, if it does, it may lock it in place permanently…ask me how I know this. Cheers. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Epoxy in recoil lug
Top