Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Discussion on reloading process
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Beluebow" data-source="post: 2357744" data-attributes="member: 3246"><p>This is my process...</p><p></p><p>1. Anneal with a BenchSource.</p><p>2. Decap with universal decapper.</p><p>3. Throw brass in baking pan, soak with Dillion case lube.</p><p>4. FLS with a bushing die.</p><p>5. Throw all sized brass into a tub of acetone for 5-10 minutes...give or take.</p><p>6. Throw all brass into corn cob media tumbler for 45min to one hour+.</p><p>7. Pick tumbling media out with tooth pick.</p><p>8. Lube necks with Neo-Lube #2</p><p>9. Expand necks with expander mandrel.</p><p>10. Trim.</p><p>11. Brush necks with nylon brush...one pass.</p><p>12. Prime.</p><p>13. Charge.</p><p>14. Seat bullets. </p><p></p><p>Pretty simple stuff that has a proven track record that works for me. There may be other variations that end up at the same place. You just gotta figure out what works for you.</p></blockquote><p></p>
[QUOTE="Beluebow, post: 2357744, member: 3246"] This is my process... 1. Anneal with a BenchSource. 2. Decap with universal decapper. 3. Throw brass in baking pan, soak with Dillion case lube. 4. FLS with a bushing die. 5. Throw all sized brass into a tub of acetone for 5-10 minutes...give or take. 6. Throw all brass into corn cob media tumbler for 45min to one hour+. 7. Pick tumbling media out with tooth pick. 8. Lube necks with Neo-Lube #2 9. Expand necks with expander mandrel. 10. Trim. 11. Brush necks with nylon brush...one pass. 12. Prime. 13. Charge. 14. Seat bullets. Pretty simple stuff that has a proven track record that works for me. There may be other variations that end up at the same place. You just gotta figure out what works for you. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Discussion on reloading process
Top