Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Cutting threads
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="RuninL8" data-source="post: 2245730" data-attributes="member: 109233"><p>I'm sorry, as far as surface finish, if you are using carbide and you are turning slower that 115 rpm. You have to take less than .002 passes with oil. Makes for alot of passes but it will work and give a better finish. Now, if that was with HSS then, you took too big of a cut (more than .003) or your machine needs adjustment, which could be a number of things. Happy to answer questions via pm.</p></blockquote><p></p>
[QUOTE="RuninL8, post: 2245730, member: 109233"] I'm sorry, as far as surface finish, if you are using carbide and you are turning slower that 115 rpm. You have to take less than .002 passes with oil. Makes for alot of passes but it will work and give a better finish. Now, if that was with HSS then, you took too big of a cut (more than .003) or your machine needs adjustment, which could be a number of things. Happy to answer questions via pm. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Cutting threads
Top