Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
custom rifle showing funky groups,.....HELP GUYS!!!!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="JustC" data-source="post: 27202" data-attributes="member: 817"><p>Gentlemen, the cases are sized neck only in a wilson die that has a .334 bushing. The brass, remington of course, is running at around .013-.014" neck thickness (as I havn't cleaned the necks up yet) but they are within .001" case-to-case. The bushing seems to be maybe .0005" in variance around it's internal surface (as measured with the rear of the caliper and keeping tension while rotatng the bushing) Could this variance be something?</p><p></p><p>The barrel is NOT bedded with a pad, which as I stated, I am thinking is incorrect. The stock is the Tactical HS model, so it is nice and wide at the front, but that may not mean much.</p><p></p><p>There is bedding along the sides of the action, but without removing the stock, I am betting there is none under the action (which it would need if there were a barrel pad)</p><p></p><p>The primer pockets are done with a drill and sinclairs uniformer, and they shine like a mirror. The cases are deburred and chamfered. Runout is no more than .002" max, with only an occasional .003" on the RCBS casemaster.</p><p></p><p>[ 05-26-2003: Message edited by: JustC ]</p></blockquote><p></p>
[QUOTE="JustC, post: 27202, member: 817"] Gentlemen, the cases are sized neck only in a wilson die that has a .334 bushing. The brass, remington of course, is running at around .013-.014" neck thickness (as I havn't cleaned the necks up yet) but they are within .001" case-to-case. The bushing seems to be maybe .0005" in variance around it's internal surface (as measured with the rear of the caliper and keeping tension while rotatng the bushing) Could this variance be something? The barrel is NOT bedded with a pad, which as I stated, I am thinking is incorrect. The stock is the Tactical HS model, so it is nice and wide at the front, but that may not mean much. There is bedding along the sides of the action, but without removing the stock, I am betting there is none under the action (which it would need if there were a barrel pad) The primer pockets are done with a drill and sinclairs uniformer, and they shine like a mirror. The cases are deburred and chamfered. Runout is no more than .002" max, with only an occasional .003" on the RCBS casemaster. [ 05-26-2003: Message edited by: JustC ] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
custom rifle showing funky groups,.....HELP GUYS!!!!
Top