prairiefire
Well-Known Member
- Joined
- Oct 11, 2010
- Messages
- 277
Hate to do this, but I have my eye on a thermal scope so.....
Kelbly Kodiak action, TG Ejector, small firing pin, Bolt is melonited, Action is KG Gunkote Tan
Mullerworks 6.5 twist barrel Heavy Palma @24", 5/8-24 muzzle thread, glass beaded finish
Saami 224 Valkyrie chamber BUT with .253" neck and barrel was throated for the 85-95 gr bullets
Factory Hornady shoots 1/2 moa in this rifle. Handloads are under 1/2 moa.
McMillan A5 w/ Hawkins dbm, F/R sling studs, F/R left side qd cups
Trigger Tech Special flat shoe
1x AW mag with HRD kit
Approximately 85 rounds down the barrel!
Reloading supplies
All brass is Hornady
250 rds new brass loaded w/ 88 eldm
75 rds 1x fired brass loaded with 88 eldm
25 pcs 2x fired brass
Whidden Bushing FL Sizing die
Forster Micro Seater
250 ct 88 eldm
Partial box 95 gr SMK
$2850 for the gun and I will throw in all the reloading supplies at no extra charge! PM if interested. I have lots of other pics of the gun - which I would gladly send to your email address, rather than clutter up this board. Let me know if you are interested in them
Kelbly Kodiak action, TG Ejector, small firing pin, Bolt is melonited, Action is KG Gunkote Tan
Mullerworks 6.5 twist barrel Heavy Palma @24", 5/8-24 muzzle thread, glass beaded finish
Saami 224 Valkyrie chamber BUT with .253" neck and barrel was throated for the 85-95 gr bullets
Factory Hornady shoots 1/2 moa in this rifle. Handloads are under 1/2 moa.
McMillan A5 w/ Hawkins dbm, F/R sling studs, F/R left side qd cups
Trigger Tech Special flat shoe
1x AW mag with HRD kit
Approximately 85 rounds down the barrel!
Reloading supplies
All brass is Hornady
250 rds new brass loaded w/ 88 eldm
75 rds 1x fired brass loaded with 88 eldm
25 pcs 2x fired brass
Whidden Bushing FL Sizing die
Forster Micro Seater
250 ct 88 eldm
Partial box 95 gr SMK
$2850 for the gun and I will throw in all the reloading supplies at no extra charge! PM if interested. I have lots of other pics of the gun - which I would gladly send to your email address, rather than clutter up this board. Let me know if you are interested in them
Attachments
Last edited: