Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Cooper rifle won't chamber twice fired brass
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Quintus" data-source="post: 1866423" data-attributes="member: 67552"><p>Odd to me the loads on brass from the same gun get tight at all especially after 2 firings. I have a Weatherby mark V in 270Bee and another on a USRAC M70 Classic Sporter from New Haven. The fully resized cases fired in the Weatherby will fit in the Winchester, but not vice verse. I have the brass (NORMA) segregated and will get 7 to 9 loads from cases in both rifles. In theory as speculated in this thread, one or the other of these rifles brass should require a small base die after a few firings. What actually fails on these brass is the necks crack. ( should anneal regularily, but). </p><p> I too would try backing that die off just a c'hair and see if that doesn't right that ship.</p></blockquote><p></p>
[QUOTE="Quintus, post: 1866423, member: 67552"] Odd to me the loads on brass from the same gun get tight at all especially after 2 firings. I have a Weatherby mark V in 270Bee and another on a USRAC M70 Classic Sporter from New Haven. The fully resized cases fired in the Weatherby will fit in the Winchester, but not vice verse. I have the brass (NORMA) segregated and will get 7 to 9 loads from cases in both rifles. In theory as speculated in this thread, one or the other of these rifles brass should require a small base die after a few firings. What actually fails on these brass is the necks crack. ( should anneal regularily, but). I too would try backing that die off just a c'hair and see if that doesn't right that ship. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Cooper rifle won't chamber twice fired brass
Top