Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Cooper rifle won't chamber twice fired brass
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Dean2" data-source="post: 1865573" data-attributes="member: 26077"><p>You can't just shave some off the bottom of an existing die, that for sure won't fix your problem, might even make it worse plus you will induce excess head space. Check with Redding and RCBS and see what the spec is at that point for one of their small base body dies. (Most small base are .002 smaller than standard in the body and head, some also give you more shoulder bump in the FL versions) You can use a 30-06 body die if they don't have FL small base in 270. If it isn't small enough you can get custom made dies that will work.</p></blockquote><p></p>
[QUOTE="Dean2, post: 1865573, member: 26077"] You can't just shave some off the bottom of an existing die, that for sure won't fix your problem, might even make it worse plus you will induce excess head space. Check with Redding and RCBS and see what the spec is at that point for one of their small base body dies. (Most small base are .002 smaller than standard in the body and head, some also give you more shoulder bump in the FL versions) You can use a 30-06 body die if they don't have FL small base in 270. If it isn't small enough you can get custom made dies that will work. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Cooper rifle won't chamber twice fired brass
Top