Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Comparing the Berger 210 VLD to the 215 Hybrid
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="bigngreen" data-source="post: 1782877" data-attributes="member: 13632"><p>Extreme long range accuracy and not slamming precision made ammunition around in a mag box kinda go hand in hand, that said his chamber is "match" which implies it's the chamber reamer was ground to match the brass loaded with the bullet he wants to use at it's best position for accuracy. I know how Broz gun was specifically and in a Rem you will need a Wyatts mag box installed to run it from a mag and the throat was cut tight and specific to a bullet. If you want to deviate and have a shorter coal you can have a reamer made by sending in a dummy round and having a reamer made for that specific application or sent it to a smith who will chamber with a no throat reamer then in a separate process throat it to the spec need for the dummy round.</p></blockquote><p></p>
[QUOTE="bigngreen, post: 1782877, member: 13632"] Extreme long range accuracy and not slamming precision made ammunition around in a mag box kinda go hand in hand, that said his chamber is "match" which implies it's the chamber reamer was ground to match the brass loaded with the bullet he wants to use at it's best position for accuracy. I know how Broz gun was specifically and in a Rem you will need a Wyatts mag box installed to run it from a mag and the throat was cut tight and specific to a bullet. If you want to deviate and have a shorter coal you can have a reamer made by sending in a dummy round and having a reamer made for that specific application or sent it to a smith who will chamber with a no throat reamer then in a separate process throat it to the spec need for the dummy round. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Comparing the Berger 210 VLD to the 215 Hybrid
Top