Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Case Seperation I thought.
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Kaptoe" data-source="post: 1618669" data-attributes="member: 107839"><p>Beauty of the 308 with that bullet diameter it is hard to overpressure with effort using h4895 or imr4064. I load both of those a ton and can't see how 41.2gr of 4895 gets you those pics .I would check everything and frankly as someone suggested throw every other load from the batch out .Even if to avoid bad luck! I have loaded 45gr of imr4064 with 150gr accubond and only get a slight shine in some of the brass and that isn't even max ffrom the hogdon website. I load that now at 44gr and the brass looks picture perfect after firing</p><p></p><p>Glad you are ok</p></blockquote><p></p>
[QUOTE="Kaptoe, post: 1618669, member: 107839"] Beauty of the 308 with that bullet diameter it is hard to overpressure with effort using h4895 or imr4064. I load both of those a ton and can't see how 41.2gr of 4895 gets you those pics .I would check everything and frankly as someone suggested throw every other load from the batch out .Even if to avoid bad luck! I have loaded 45gr of imr4064 with 150gr accubond and only get a slight shine in some of the brass and that isn't even max ffrom the hogdon website. I load that now at 44gr and the brass looks picture perfect after firing Glad you are ok [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Case Seperation I thought.
Top