Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Carbon ring? Removal?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Crowe284" data-source="post: 1417441" data-attributes="member: 97064"><p>Well boys, I guess I got it out. In scrubbed the hell out of it with kg1 and also let it soak. However, I don't believe this was my biggest problem, I think it was the brass. I annealed the brass, longer than I normally do, and the saum is bugholing again. I just started to anneal as the Norma brass really needs it. I used templaq 750 and an annealease. I set the swell time to drop the brass just as the templaq "goes away". Obviously this was not long enough. I basically annealed the brass twice as long this time. I just trial and errored it my using a stopwatch. A total of 12 seconds per case was the magic number. I actually added .2 grains of powder to load to get it to come back and I have no pressure signs. I'm using 62.2 gr of H1000 moving the 180 gr hybrid 2900 fps. Could go higher but load bugholes and is easy on brass. I have 3 pieces of the Norma with 13 loading on them and still perfect. I am going to start cleaning for the carbon ring every time now though.</p></blockquote><p></p>
[QUOTE="Crowe284, post: 1417441, member: 97064"] Well boys, I guess I got it out. In scrubbed the hell out of it with kg1 and also let it soak. However, I don’t believe this was my biggest problem, I think it was the brass. I annealed the brass, longer than I normally do, and the saum is bugholing again. I just started to anneal as the Norma brass really needs it. I used templaq 750 and an annealease. I set the swell time to drop the brass just as the templaq “goes away”. Obviously this was not long enough. I basically annealed the brass twice as long this time. I just trial and errored it my using a stopwatch. A total of 12 seconds per case was the magic number. I actually added .2 grains of powder to load to get it to come back and I have no pressure signs. I’m using 62.2 gr of H1000 moving the 180 gr hybrid 2900 fps. Could go higher but load bugholes and is easy on brass. I have 3 pieces of the Norma with 13 loading on them and still perfect. I am going to start cleaning for the carbon ring every time now though. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Carbon ring? Removal?
Top