Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
bullet weights
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="bdyal1972" data-source="post: 1989932" data-attributes="member: 50039"><p>Personally </p><p></p><p>I weigh bullets, brass AND powder to .1 grain</p><p></p><p>I make groups of the tightest bullets and brass in 1 pile</p><p></p><p>Everything else another pile</p><p></p><p>First pile is long range and hunting</p><p></p><p>Second pile is plinking</p><p></p><p>Full size full length resizing until i know the rifle and load works, verify nech length and diameter ARE PERFECT AFTER RESIZING AND AFTER LOADING ON EVERY ROUND, MAKE SURE NECKS ARE PERFECT AND TRIM AND TURN AS NECESSARY,, make positive OAL is correct and within .001, make sure each round chambers, verify CONCENTRICITY with each round</p><p></p><p>I am anal about bullet jump to .0001"</p><p></p><p>I AM ALSO ANAL ABOUT A PERECT MUZZLE AND 2 IF NOT 3 DIFFERENT HARD GLASS BEDDED RECOIL LIGS AND 1/16TH INCH CLEARANCE AROUND THE BARREL FULL LENGTH MINIMUM</p><p></p><p>I also locktight EVERY bolt,screw, nut....</p><p></p><p>I am an oddball I know.</p><p></p><p>But it works for me....</p><p></p><p>Just like painting....</p><p></p><p>Its all in the prep.</p></blockquote><p></p>
[QUOTE="bdyal1972, post: 1989932, member: 50039"] Personally I weigh bullets, brass AND powder to .1 grain I make groups of the tightest bullets and brass in 1 pile Everything else another pile First pile is long range and hunting Second pile is plinking Full size full length resizing until i know the rifle and load works, verify nech length and diameter ARE PERFECT AFTER RESIZING AND AFTER LOADING ON EVERY ROUND, MAKE SURE NECKS ARE PERFECT AND TRIM AND TURN AS NECESSARY,, make positive OAL is correct and within .001, make sure each round chambers, verify CONCENTRICITY with each round I am anal about bullet jump to .0001" I AM ALSO ANAL ABOUT A PERECT MUZZLE AND 2 IF NOT 3 DIFFERENT HARD GLASS BEDDED RECOIL LIGS AND 1/16TH INCH CLEARANCE AROUND THE BARREL FULL LENGTH MINIMUM I also locktight EVERY bolt,screw, nut.... I am an oddball I know. But it works for me.... Just like painting.... Its all in the prep. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
bullet weights
Top