Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Bullet runout what is the max?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="panama" data-source="post: 642636" data-attributes="member: 37565"><p>I know this thread is about acc. but has anyone had a 1/2" or better group with 5 shots and then #6 runs out to 2". went thru my reloading sequence, could'nt find any thing wrong. have done this with rem. win. and fed. brass, the fliers were with rem and win never with fed. got to isolating the individual cases after depriming, which i do before sizing and found that the fliers had flash holes that were .082 made myself a probe to within .0815 and any case with a flash hole that lets the probe drop in i discard, no more fliers. just something to watch out for guys, also the pressure was up there with that particular case. it helped me, i asked bo clerke about this and he assured me that pressure would really be up there with my handloads which are on the hot side to begin with. 30-06 AI driving 190. horn interlks @ 2970fps,changing to a 180. horn interlk and l.o.a same powder charge 3022fps, used fed 215 primers. by the way any body know why there is a shortage of fed 215??? hope this helps some one. winchester cases are between 15 to 16 grains lighter than rem or fed. in the 06 cases i adjust my charge accordingly. good shooting hermanos. william.</p></blockquote><p></p>
[QUOTE="panama, post: 642636, member: 37565"] I know this thread is about acc. but has anyone had a 1/2" or better group with 5 shots and then #6 runs out to 2". went thru my reloading sequence, could'nt find any thing wrong. have done this with rem. win. and fed. brass, the fliers were with rem and win never with fed. got to isolating the individual cases after depriming, which i do before sizing and found that the fliers had flash holes that were .082 made myself a probe to within .0815 and any case with a flash hole that lets the probe drop in i discard, no more fliers. just something to watch out for guys, also the pressure was up there with that particular case. it helped me, i asked bo clerke about this and he assured me that pressure would really be up there with my handloads which are on the hot side to begin with. 30-06 AI driving 190. horn interlks @ 2970fps,changing to a 180. horn interlk and l.o.a same powder charge 3022fps, used fed 215 primers. by the way any body know why there is a shortage of fed 215??? hope this helps some one. winchester cases are between 15 to 16 grains lighter than rem or fed. in the 06 cases i adjust my charge accordingly. good shooting hermanos. william. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Bullet runout what is the max?
Top