Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
bullet jam
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Hired Gun" data-source="post: 109197" data-attributes="member: 1290"><p>Apparently you have never tried it. It is very precise. To get the bullet into the rifling by any measurable amount beyond jam length about takes a hammer blow to the back of the bullet. The differences in depth due to neck tension would be negligible at most. Other than my Weatherby's I do this every time I load and I keep records to watch for throat movement. The jam seated rounds usually all measure to within .001 of each other. The biggest variances are due to tip deformities if measured with calipers. When measured to the ogive in my seater they are nuts on.</p></blockquote><p></p>
[QUOTE="Hired Gun, post: 109197, member: 1290"] Apparently you have never tried it. It is very precise. To get the bullet into the rifling by any measurable amount beyond jam length about takes a hammer blow to the back of the bullet. The differences in depth due to neck tension would be negligible at most. Other than my Weatherby's I do this every time I load and I keep records to watch for throat movement. The jam seated rounds usually all measure to within .001 of each other. The biggest variances are due to tip deformities if measured with calipers. When measured to the ogive in my seater they are nuts on. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
bullet jam
Top