Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Building your own laminated stock
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="John Klingenberg" data-source="post: 2024205" data-attributes="member: 107749"><p>I've done a couple. I'm not much of a wood worker but for the various things I've done I've found it easier to start with a square blank. Build a good fitting "box" to keep them from drifting around and I used a metal frame with two hydraulic Jack's over 3 inch steel tube to press together. I initially used Acura glass in the red box but switched to the marine epoxy from West. You can square it up and inlet after the block is cured. It is a fun project but very time consuming.</p></blockquote><p></p>
[QUOTE="John Klingenberg, post: 2024205, member: 107749"] I've done a couple. I'm not much of a wood worker but for the various things I've done I've found it easier to start with a square blank. Build a good fitting "box" to keep them from drifting around and I used a metal frame with two hydraulic Jack's over 3 inch steel tube to press together. I initially used Acura glass in the red box but switched to the marine epoxy from West. You can square it up and inlet after the block is cured. It is a fun project but very time consuming. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Building your own laminated stock
Top