Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Building 7lrm need reloading data
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Capt. D" data-source="post: 1049357" data-attributes="member: 10225"><p>Just had one built. Used a reamer from gunwerks. Talked to Arron Davidson before I started load developement and he said the throat was designed for the 180 berger hybrids. If you want to shoot the 180 bergrer vld's you will see pressure signes sooner. He also said that the there have been some that have had good luck with the 168 vld's and retumbo. I started my developement at 68gr of H-1000 and settled on 71.5gr shooting in the low .4's. Started with the bullet .015 off of the lands and am now playing with seating depth to try to tighten it up. I shot up to 73gr with no pressure signes but at 72 grains my group was all of a sudden 3/4 minute low. Guess I hit a node at 72gr. Gunwerks load is 72gr H-1000, CCI 250 primer, (would like to find some Federal 215's also) and the 180 Berger hybrid. Good Luck.</p></blockquote><p></p>
[QUOTE="Capt. D, post: 1049357, member: 10225"] Just had one built. Used a reamer from gunwerks. Talked to Arron Davidson before I started load developement and he said the throat was designed for the 180 berger hybrids. If you want to shoot the 180 bergrer vld's you will see pressure signes sooner. He also said that the there have been some that have had good luck with the 168 vld's and retumbo. I started my developement at 68gr of H-1000 and settled on 71.5gr shooting in the low .4's. Started with the bullet .015 off of the lands and am now playing with seating depth to try to tighten it up. I shot up to 73gr with no pressure signes but at 72 grains my group was all of a sudden 3/4 minute low. Guess I hit a node at 72gr. Gunwerks load is 72gr H-1000, CCI 250 primer, (would like to find some Federal 215's also) and the 180 Berger hybrid. Good Luck. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Building 7lrm need reloading data
Top