Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Brux. First experience with Brux. Holy freakin cow.
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="B-P-UU" data-source="post: 1216713" data-attributes="member: 29114"><p>RL-26 is magic in a 280 AI.. basically turns it into a 7 rem mag velocity wise. I've played with it a little bit to find pressure/velocity. With a 168 VLD and 210M primers, I had extractor marks at ~3,150 fps. I could easily run around 3k with no pressure issues. </p><p>With a 175 ELD-X and CCI 250's I had extractor marks at 2,980 fps. I don't have my data book in front of me, so can't quote charge weights for the above velocities. Velocities measured with a Magnetospeed</p><p></p><p>This is with a 25" Bartlein barrel.</p><p></p><p>The load I've ran prior to playing with RL-26 is 61.5 gr. of Retumbo, 210M, Nosler Brass, and 168 H-VLD's. they run right at 2,875 fps. I worked up to 63 or 63.5 grains, but didn't gain much velocity (was 2925 or something like that). </p><p></p><p>My chamber has .100" free bore, so able to load a bit longer.</p></blockquote><p></p>
[QUOTE="B-P-UU, post: 1216713, member: 29114"] RL-26 is magic in a 280 AI.. basically turns it into a 7 rem mag velocity wise. I've played with it a little bit to find pressure/velocity. With a 168 VLD and 210M primers, I had extractor marks at ~3,150 fps. I could easily run around 3k with no pressure issues. With a 175 ELD-X and CCI 250's I had extractor marks at 2,980 fps. I don't have my data book in front of me, so can't quote charge weights for the above velocities. Velocities measured with a Magnetospeed This is with a 25" Bartlein barrel. The load I've ran prior to playing with RL-26 is 61.5 gr. of Retumbo, 210M, Nosler Brass, and 168 H-VLD's. they run right at 2,875 fps. I worked up to 63 or 63.5 grains, but didn't gain much velocity (was 2925 or something like that). My chamber has .100" free bore, so able to load a bit longer. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Brux. First experience with Brux. Holy freakin cow.
Top