Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Brass prep
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Alibiiv" data-source="post: 1808935" data-attributes="member: 69192"><p>Since I started prepping all my brass it has made a big difference. Here's my method:</p><ol> <li data-xf-list-type="ol">Inspect the brass looking for split necks/casings.</li> <li data-xf-list-type="ol">If new not necessary, deprime brass with a Lee universal decapping die.</li> <li data-xf-list-type="ol">Once all of brass is deprimed I anneal the brass.</li> <li data-xf-list-type="ol">After annealing blow out the casings with compressed air (100-120PSI).</li> <li data-xf-list-type="ol">Tumble the brass in nut shell media with a brass polish added.</li> <li data-xf-list-type="ol">Full-length resize cases with the decapping plug out.</li> <li data-xf-list-type="ol">Neck size cases with a Sinclair mandrel.</li> <li data-xf-list-type="ol">Measure casings to find the shortest casing and trim all the casings to length.</li> <li data-xf-list-type="ol">I haven't been turning necks as of yet, but intend to start skim turning necks if necessary.</li> <li data-xf-list-type="ol">Deburr case mouths and necks.<br /> </li> <li data-xf-list-type="ol">Ream primer pockets and deburr flash holes.</li> </ol></blockquote><p></p>
[QUOTE="Alibiiv, post: 1808935, member: 69192"] Since I started prepping all my brass it has made a big difference. Here's my method: [LIST=1] [*]Inspect the brass looking for split necks/casings. [*]If new not necessary, deprime brass with a Lee universal decapping die. [*]Once all of brass is deprimed I anneal the brass. [*]After annealing blow out the casings with compressed air (100-120PSI). [*]Tumble the brass in nut shell media with a brass polish added. [*]Full-length resize cases with the decapping plug out. [*]Neck size cases with a Sinclair mandrel. [*]Measure casings to find the shortest casing and trim all the casings to length. [*]I haven't been turning necks as of yet, but intend to start skim turning necks if necessary. [*]Deburr case mouths and necks. [*]Ream primer pockets and deburr flash holes. [/LIST] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Brass prep
Top