Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Brass Case Head Separation after 6 firings
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Bravo 4" data-source="post: 2529699" data-attributes="member: 8873"><p>Improving Peterson brass they told me to anneal down the shoulder and case body a bit, and to lube the case a little. As mentioned make sure the action lugs are lubed, as they should be.</p><p>I have a hydro forming die for my .375 Snipetac but do not like using it. You have to smack it pretty dang hard with a heavy hammer (with it screwed into the press with the ram all the way up) to half-a$& push the shoulder forward. Then you have to fireform to get a sharp shoulder. Not worth my time and don't want to damage the press.</p></blockquote><p></p>
[QUOTE="Bravo 4, post: 2529699, member: 8873"] Improving Peterson brass they told me to anneal down the shoulder and case body a bit, and to lube the case a little. As mentioned make sure the action lugs are lubed, as they should be. I have a hydro forming die for my .375 Snipetac but do not like using it. You have to smack it pretty dang hard with a heavy hammer (with it screwed into the press with the ram all the way up) to half-a$& push the shoulder forward. Then you have to fireform to get a sharp shoulder. Not worth my time and don’t want to damage the press. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Brass Case Head Separation after 6 firings
Top