Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Brass a bit stiff when chambering....at my wits end. Help!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Tumbleweed" data-source="post: 1952100" data-attributes="member: 9281"><p>It is your brass! Some batches of Nosler brass have tons of spring back even with annealing. I had 40 rounds in 30 Nosler that were complete garbage. This stuff showed false pressure signs as virgin, factory ammo with sticky extraction. I thought i just had a tight barrel as it was new. I annealed every 3 firings and really had to adjust my sizing die way down just to get an easy re-chamber. Running very light reloads I'd get sticky extraction every time. </p><p>Finally wised up and realized that my shoulder datum measurement was about .003" longer than my actual chamber after extraction. Just crap quality brass on this lot. Bought ADG and all problems went away.</p></blockquote><p></p>
[QUOTE="Tumbleweed, post: 1952100, member: 9281"] It is your brass! Some batches of Nosler brass have tons of spring back even with annealing. I had 40 rounds in 30 Nosler that were complete garbage. This stuff showed false pressure signs as virgin, factory ammo with sticky extraction. I thought i just had a tight barrel as it was new. I annealed every 3 firings and really had to adjust my sizing die way down just to get an easy re-chamber. Running very light reloads I'd get sticky extraction every time. Finally wised up and realized that my shoulder datum measurement was about .003" longer than my actual chamber after extraction. Just crap quality brass on this lot. Bought ADG and all problems went away. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Brass a bit stiff when chambering....at my wits end. Help!
Top