Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Brass a bit stiff when chambering....at my wits end. Help!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="10spottedhorses" data-source="post: 1951711" data-attributes="member: 114984"><p>The RCBS folks were correct as usual. Run the shell holder all the way to the top of the stroke, screw the length resizing die all the way down until it touches the shell holder, lower the shell holder slightly, lower the die about 1/4 to 1/3 of a turn, raise the ram and if it cams over with a firm force on the ram, set the set screw on the lock ring. Resize your 8 cases, measure them to a 0.0005 and if they don't match, something, probably the brass, but maybe the die, is at fault. Have you annealed your brass? If none of the above works, annual your brass.</p></blockquote><p></p>
[QUOTE="10spottedhorses, post: 1951711, member: 114984"] The RCBS folks were correct as usual. Run the shell holder all the way to the top of the stroke, screw the length resizing die all the way down until it touches the shell holder, lower the shell holder slightly, lower the die about 1/4 to 1/3 of a turn, raise the ram and if it cams over with a firm force on the ram, set the set screw on the lock ring. Resize your 8 cases, measure them to a 0.0005 and if they don't match, something, probably the brass, but maybe the die, is at fault. Have you annealed your brass? If none of the above works, annual your brass. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Brass a bit stiff when chambering....at my wits end. Help!
Top