Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Equipment Discussions
BR Pivot upgrade
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Just ken" data-source="post: 2002060" data-attributes="member: 43394"><p>4 ¼" X 10 ¾" X 0.032" shim, soft aluminum preferred</p><p>2 7/8" X 10 ¾" X 010" shim, soft aluminum preferred</p><p>Disassemble, remove nylon sleeve and nylon puck bottom of base and top</p><p>Insert 4 ¼" shim into bottom, I put opening a tightening screw</p><p>Insert nylon sleeve, trimming as required, I put opening a tightening screw</p><p>Insert puck, trimming may be required, I left original and hammer into place. This keep shim in place. There is a hole in underside to pound out if necessary.</p><p>Insert 2 7/8" shim in top, I put opening a tightening screw</p><p>Insert nylon sleeve, trimming may be required, I put opening a tightening screw</p><p>Insert puck, trimming may be required, I left original and hammer into place. This keep shim in place. There is a hole in underside to pound out if necessary.</p><p>Assembly is a more work, as tighter </p><p>Disassembly, remove top first</p><p>Remove post from bottom before removing seat.</p><p>Vary thickness of shims to improve easy of assemble vs movement</p><p>Supplied top is a beautiful piece of wood but cannot sit behind rifle.</p><p>Working on new top that allows both side and behind rifle position if interested let me know</p></blockquote><p></p>
[QUOTE="Just ken, post: 2002060, member: 43394"] 4 ¼” X 10 ¾” X 0.032” shim, soft aluminum preferred 2 7/8” X 10 ¾” X 010” shim, soft aluminum preferred Disassemble, remove nylon sleeve and nylon puck bottom of base and top Insert 4 ¼” shim into bottom, I put opening a tightening screw Insert nylon sleeve, trimming as required, I put opening a tightening screw Insert puck, trimming may be required, I left original and hammer into place. This keep shim in place. There is a hole in underside to pound out if necessary. Insert 2 7/8” shim in top, I put opening a tightening screw Insert nylon sleeve, trimming may be required, I put opening a tightening screw Insert puck, trimming may be required, I left original and hammer into place. This keep shim in place. There is a hole in underside to pound out if necessary. Assembly is a more work, as tighter Disassembly, remove top first Remove post from bottom before removing seat. Vary thickness of shims to improve easy of assemble vs movement Supplied top is a beautiful piece of wood but cannot sit behind rifle. Working on new top that allows both side and behind rifle position if interested let me know [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Equipment Discussions
BR Pivot upgrade
Top