Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Blown primers on 6.5 CM-Problem Solved on page 6!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="bomberodevil" data-source="post: 2644792" data-attributes="member: 23175"><p>Good point. I forgot to mention, I take 8-10 measurements with the Hornady gauge and a fire-formed case from my rifle to measure the CBTO with every different bullet I use, and then start at .030" off the lands for hunting loads. I'll re-measure it this weekend, but my CBTO was 2.218", COAL at the lands was 2.876", and the COAL after backing out .030" was 2.846". I also trim every case to SAAMI prior to loading.</p></blockquote><p></p>
[QUOTE="bomberodevil, post: 2644792, member: 23175"] Good point. I forgot to mention, I take 8-10 measurements with the Hornady gauge and a fire-formed case from my rifle to measure the CBTO with every different bullet I use, and then start at .030” off the lands for hunting loads. I’ll re-measure it this weekend, but my CBTO was 2.218”, COAL at the lands was 2.876”, and the COAL after backing out .030” was 2.846”. I also trim every case to SAAMI prior to loading. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Blown primers on 6.5 CM-Problem Solved on page 6!
Top