Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Bighorn Origin SA, 300wsm & BDL. Will it work?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="HOOFER" data-source="post: 1839449" data-attributes="member: 112889"><p>I have been doing a lot of research on this as well as I plan on using one for a 6.5 prc build. you have to have the action milled slightly to accept the wyatt extended box for a BDL setup and have the bolt stop modified. but If you using detachable mags, you can get away with it with a WSM/ mag with no binder plate. to get you out to 2.950 with no modification to the action. from a few guys I have spoke with its not a big deal and most smiths can do it easy as its the same for a Remington 700 SA. If you don't want to have your action milled you have to run mags or use another action such as the TL3 I believe can come cut for the wyatt box from factory. I have decided to forego the milling as I don't hunt on a loaded chamber. and I would like more than 2 rounds in the magazine.</p></blockquote><p></p>
[QUOTE="HOOFER, post: 1839449, member: 112889"] I have been doing a lot of research on this as well as I plan on using one for a 6.5 prc build. you have to have the action milled slightly to accept the wyatt extended box for a BDL setup and have the bolt stop modified. but If you using detachable mags, you can get away with it with a WSM/ mag with no binder plate. to get you out to 2.950 with no modification to the action. from a few guys I have spoke with its not a big deal and most smiths can do it easy as its the same for a Remington 700 SA. If you don't want to have your action milled you have to run mags or use another action such as the TL3 I believe can come cut for the wyatt box from factory. I have decided to forego the milling as I don't hunt on a loaded chamber. and I would like more than 2 rounds in the magazine. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Bighorn Origin SA, 300wsm & BDL. Will it work?
Top