Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
BERTRAM BRASS FOR 6.5 SHERMAN SHORTMAG??
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="elkaholic" data-source="post: 1361756" data-attributes="member: 13833"><p>This is what I know from bertram so far. The brass would be dimensionally correct except for a slight forming of the body taper. This would not be much more than what you have in factory ammo. It is necessary because the brass would stick in the dies with the minimal taper off the ss. This would not affect running full loads the first time and would have no more affect on accuracy than a first firing of factory ammo. The low taper is one of the advantages of the ss and well worth doing IMO.</p></blockquote><p></p>
[QUOTE="elkaholic, post: 1361756, member: 13833"] This is what I know from bertram so far. The brass would be dimensionally correct except for a slight forming of the body taper. This would not be much more than what you have in factory ammo. It is necessary because the brass would stick in the dies with the minimal taper off the ss. This would not affect running full loads the first time and would have no more affect on accuracy than a first firing of factory ammo. The low taper is one of the advantages of the ss and well worth doing IMO. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
BERTRAM BRASS FOR 6.5 SHERMAN SHORTMAG??
Top