Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Bedding lug area tight or relieved?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Guest" data-source="post: 24638"><p>Brent </p><p> </p><p>The measure of a perfect bedding job is to torque the guard screws to their proper numbers, then mount the body of a 1/10,000" indicator to the stock. Then carefully place the stylus on the barrel to measure the movement of the barrel in relation to the stock. Zero movement should occur when you gradually remove torque from each screw, independently of the other screw. </p><p> </p><p>To this end the bottom of the recoil lug must have clearance. You should place 2 layers of tape on the bottom of the lug wrapping around any radius until you reach the 'flat' on each side of the recoil lug. </p><p> </p><p>If you do not tape off the bottom, when the guard screws are tightened the bedding material will compress and you will stress the action about .002" against the stock, not good. Having a tight fit on the sides of the recoil lug is more important on a round action, than one flat on the bottom. </p><p>I think it is desirable to have a tight fit on the sides for both designs with the larger calibers, the more surface area you have to control torque the longer your bedding job will last. <img src="http://images/icons/smile.gif" alt="" class="fr-fic fr-dii fr-draggable " style="" /></p></blockquote><p></p>
[QUOTE="Guest, post: 24638"] Brent The measure of a perfect bedding job is to torque the guard screws to their proper numbers, then mount the body of a 1/10,000" indicator to the stock. Then carefully place the stylus on the barrel to measure the movement of the barrel in relation to the stock. Zero movement should occur when you gradually remove torque from each screw, independently of the other screw. To this end the bottom of the recoil lug must have clearance. You should place 2 layers of tape on the bottom of the lug wrapping around any radius until you reach the 'flat' on each side of the recoil lug. If you do not tape off the bottom, when the guard screws are tightened the bedding material will compress and you will stress the action about .002" against the stock, not good. Having a tight fit on the sides of the recoil lug is more important on a round action, than one flat on the bottom. I think it is desirable to have a tight fit on the sides for both designs with the larger calibers, the more surface area you have to control torque the longer your bedding job will last. [img]images/icons/smile.gif[/img] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Bedding lug area tight or relieved?
Top