Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
B&C Medalist Weatherby style?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="jrock" data-source="post: 955120" data-attributes="member: 78569"><p>I put one on my Rem 700 in 7mm RM and had to do a bit of work on the barrel channel as they don't come fitted to the magnum contour. Slow easy work, just make sure you don't take too much out. Love the fit, does not reduce recoil, the Pachmayr decelerator pad is pretty stiff compared to some Limbsavers I've used. However, I was under the impression that the stock would be stiff on the fore end with the full length aluminum bedding block but I can tell you to forget about it. I can pull it away from the barrel a good 3/16". If your looking for a stiff stock, I would go with the tactical ones. I also did a stress free bedding job on the action as the block torqued the action when the screws were tightened down. Will sell you mine if interested.</p></blockquote><p></p>
[QUOTE="jrock, post: 955120, member: 78569"] I put one on my Rem 700 in 7mm RM and had to do a bit of work on the barrel channel as they don't come fitted to the magnum contour. Slow easy work, just make sure you don't take too much out. Love the fit, does not reduce recoil, the Pachmayr decelerator pad is pretty stiff compared to some Limbsavers I've used. However, I was under the impression that the stock would be stiff on the fore end with the full length aluminum bedding block but I can tell you to forget about it. I can pull it away from the barrel a good 3/16". If your looking for a stiff stock, I would go with the tactical ones. I also did a stress free bedding job on the action as the block torqued the action when the screws were tightened down. Will sell you mine if interested. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
B&C Medalist Weatherby style?
Top