Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Anyone using a Witt Machine Brake ?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="jasonco" data-source="post: 2062818" data-attributes="member: 15637"><p>That could be problematic! I believe I ran across one of my boxes last week, with the instructions, but it's at my shop. So when I relocate it, I'l post it up?</p><p></p><p>Quick instruction from memory:</p><p>1. Clean about 1.5" of the outer barrel surface</p><p>2. Using a calipers, measure the barrel at the muzzle and from 1" away from the muzzle</p><p></p><p>Install:</p><p>1. Clean muzzle end/area of barrel</p><p>2. Degrease all brake components</p><p>3. Apply a healthy amount of Blue Loctite on barrel</p><p>4. Put brake on using a twisting back and forth motion</p><p>5. Apply a drop to each hex screw and tighten equally ( I don't recall the inch/lbs though) edit:14-15 in/lbs</p><p>6. Let Loctite set</p><p>7. Shoot</p></blockquote><p></p>
[QUOTE="jasonco, post: 2062818, member: 15637"] That could be problematic! I believe I ran across one of my boxes last week, with the instructions, but it's at my shop. So when I relocate it, I'l post it up? Quick instruction from memory: 1. Clean about 1.5" of the outer barrel surface 2. Using a calipers, measure the barrel at the muzzle and from 1" away from the muzzle Install: 1. Clean muzzle end/area of barrel 2. Degrease all brake components 3. Apply a healthy amount of Blue Loctite on barrel 4. Put brake on using a twisting back and forth motion 5. Apply a drop to each hex screw and tighten equally ( I don't recall the inch/lbs though) edit:14-15 in/lbs 6. Let Loctite set 7. Shoot [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Anyone using a Witt Machine Brake ?
Top