Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Anyone have any tricks for adjusting POI consistency across multiple loads?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="pods8" data-source="post: 1034966" data-attributes="member: 83233"><p>Not trying to be condescending, just not following your thought process. You will regardless have to make a vertical adjustment in your mind correct? If so I really don't see the difference to do horizontal too. Note I don't run target turrets either, all mine are hunting scopes under caps too BUT they are marked dials so I don't need to count clicks specifically. Do you not have markings to repeatedly go between? I presume you'd only be playing around with light/practice loads on the range with ample time?</p><p></p><p>Long story short I personally don't know of methods to try and force a POI between different loads so I was approaching it from a method I find works fine for me.</p><p></p><p>As for mechanically locking when bedding it occurs when something wider is below the line of the bedding, thus it can't be pulled out. I don't know what that gun looks like under the stock with that second tube but if it is two stacked tubes (barrel over the mag) you would likely need to fill in the area where then tubes meet with clay out to the diameter of the tubes IF you were so inclined to bed it. But I have no idea how well bedding the magazine tube, which is mostly what would occur there, would do in for your goals.</p></blockquote><p></p>
[QUOTE="pods8, post: 1034966, member: 83233"] Not trying to be condescending, just not following your thought process. You will regardless have to make a vertical adjustment in your mind correct? If so I really don't see the difference to do horizontal too. Note I don't run target turrets either, all mine are hunting scopes under caps too BUT they are marked dials so I don't need to count clicks specifically. Do you not have markings to repeatedly go between? I presume you'd only be playing around with light/practice loads on the range with ample time? Long story short I personally don't know of methods to try and force a POI between different loads so I was approaching it from a method I find works fine for me. As for mechanically locking when bedding it occurs when something wider is below the line of the bedding, thus it can't be pulled out. I don't know what that gun looks like under the stock with that second tube but if it is two stacked tubes (barrel over the mag) you would likely need to fill in the area where then tubes meet with clay out to the diameter of the tubes IF you were so inclined to bed it. But I have no idea how well bedding the magazine tube, which is mostly what would occur there, would do in for your goals. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Anyone have any tricks for adjusting POI consistency across multiple loads?
Top