Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Alamo Precision?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="John 264" data-source="post: 1897654" data-attributes="member: 110440"><p>I was told by a gentleman at Alamo precision that they make a thousand or more rifles a year that is a semi production rifle they can't begin to build with the attention to the very fine details of a true custom rifle like making sure the receiver threads are single point cut to be concentric with the bolt raceway ,the receiver lugs are trued ,and the receiver face is trued, the recoil lug is pinned, the bolt lugs are trued, the bolt face is trued, install M16 extractor if the customer requests it and side bolt release and bush the firing pin hole and turn down the firing pin, type of crown, muzzle brake </p><p>now the stock you start with a good fit and then stress free bedding where you can eliminate stress on the action now you need to fit the stock to the customer IE. length of pull finger grooves ajustable comb type of finish recoil pad</p></blockquote><p></p>
[QUOTE="John 264, post: 1897654, member: 110440"] I was told by a gentleman at Alamo precision that they make a thousand or more rifles a year that is a semi production rifle they can't begin to build with the attention to the very fine details of a true custom rifle like making sure the receiver threads are single point cut to be concentric with the bolt raceway ,the receiver lugs are trued ,and the receiver face is trued, the recoil lug is pinned, the bolt lugs are trued, the bolt face is trued, install M16 extractor if the customer requests it and side bolt release and bush the firing pin hole and turn down the firing pin, type of crown, muzzle brake now the stock you start with a good fit and then stress free bedding where you can eliminate stress on the action now you need to fit the stock to the customer IE. length of pull finger grooves ajustable comb type of finish recoil pad [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Alamo Precision?
Top