Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
ADG Brass Consistency Data
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="BillNye" data-source="post: 2042834" data-attributes="member: 114642"><p>Hopefully this helps someone:</p><p></p><p>Just finished neck turning and weight sorting some ADG brass for the 7 Sherman Short.</p><p></p><p>The attached image shows the case weights of this admittedly small sample. The extreme spread was 2.7gr. 175, or approximately 87.5% of cases fell within 2 gr of each other, which is the level to which I sort brass. 72% were within 1.5 gr of each other and 54% were within 1 gr. Case necks tapered from between .0160 and .0185 at the shoulder junction to .0145 and .0140 at the case mouth. Turning did not seem to be necessary but I skimmed them all to .0140 anyways, which cleaned up approximately 65-95% of each neck.</p></blockquote><p></p>
[QUOTE="BillNye, post: 2042834, member: 114642"] Hopefully this helps someone: Just finished neck turning and weight sorting some ADG brass for the 7 Sherman Short. The attached image shows the case weights of this admittedly small sample. The extreme spread was 2.7gr. 175, or approximately 87.5% of cases fell within 2 gr of each other, which is the level to which I sort brass. 72% were within 1.5 gr of each other and 54% were within 1 gr. Case necks tapered from between .0160 and .0185 at the shoulder junction to .0145 and .0140 at the case mouth. Turning did not seem to be necessary but I skimmed them all to .0140 anyways, which cleaned up approximately 65-95% of each neck. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
ADG Brass Consistency Data
Top