Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Action suitability for 30SM?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="nkyshooter" data-source="post: 2035585" data-attributes="member: 83787"><p>[USER=98308]@XSIVSPD[/USER] - I don't have links on it ... I just did it myself to verify it works ... I took a once fired PRC case and ran it into my 300 winmag neck collet die from Lee ... just had to adjust a bit for slightly different case length ... then, I just used my 300 winmag dead length seater from Lee and seated a bullet ... worked great on the PRC. Don't know yet if I can run a 30SM into them as the diameter at the shoulder wall junction is a small amount larger and I won't know if there is enough clearance remaining until I get my hands on a fired 30SM case to verify the approach holds together for the improved ...</p><p></p><p>NOTE: I've used this approach with my 260 ackley using Lee 260 remington collet and dead length seater dies as well. It is important to ONLY do this using the neck collet and the dead length seater dies ... standard neck dies and seaters will NOT work with this method.</p><p></p><p>Here is a 300 winmag and a dummy 300 prc I used this method on ...</p><p></p><p>[ATTACH=full]229227[/ATTACH]</p></blockquote><p></p>
[QUOTE="nkyshooter, post: 2035585, member: 83787"] [USER=98308]@XSIVSPD[/USER] - I don't have links on it ... I just did it myself to verify it works ... I took a once fired PRC case and ran it into my 300 winmag neck collet die from Lee ... just had to adjust a bit for slightly different case length ... then, I just used my 300 winmag dead length seater from Lee and seated a bullet ... worked great on the PRC. Don't know yet if I can run a 30SM into them as the diameter at the shoulder wall junction is a small amount larger and I won't know if there is enough clearance remaining until I get my hands on a fired 30SM case to verify the approach holds together for the improved ... NOTE: I've used this approach with my 260 ackley using Lee 260 remington collet and dead length seater dies as well. It is important to ONLY do this using the neck collet and the dead length seater dies ... standard neck dies and seaters will NOT work with this method. Here is a 300 winmag and a dummy 300 prc I used this method on ... [ATTACH type="full"]229227[/ATTACH] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Action suitability for 30SM?
Top