Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
accuracy problems with new barrel
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="elkaholic" data-source="post: 352323" data-attributes="member: 13833"><p>Several people have mentioned the seating depth already and they are correct. When using vld's they most likely need to be very near or even into the lands. My 6.5 Sherman likes the 140 bergers .020" into the lands. Because of the sharp angle of the ogive, they tend not to "stick" in the barrel as easy when extracting a loaded round. One word of caution; when doing this work up your load carefully as it sometimes can raise pressures, especially with larger bores.</p><p>Good luck....Rich</p></blockquote><p></p>
[QUOTE="elkaholic, post: 352323, member: 13833"] Several people have mentioned the seating depth already and they are correct. When using vld's they most likely need to be very near or even into the lands. My 6.5 Sherman likes the 140 bergers .020" into the lands. Because of the sharp angle of the ogive, they tend not to "stick" in the barrel as easy when extracting a loaded round. One word of caution; when doing this work up your load carefully as it sometimes can raise pressures, especially with larger bores. Good luck....Rich [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
accuracy problems with new barrel
Top