Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Accuracy issue with semi-custom Savage 30-06
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="cmorsch" data-source="post: 846165" data-attributes="member: 59422"><p>Im having issues tracking down a issue with the accuracy Im getting with a build I did off of my Savage 111. I am consistently getting 2 flyers approx. to the left during my load development, but the other 3 shots are all within .5 moa and am having a tough time figuring out what is causing it. The Flyers open the group up to 1.1-1.2 moa. The rifle specs are a shilen stainless match 1-10 twist 26" varmint contour, competition recoil lug and barrel nut, rifle basix trigger, the action was timed by stockade gun works as well as bedding the rifle to one of their stocks. Im currently working with a load of a 200gr accubond with 53 grains of imr4350 Winchester brass and a CCI200 primer seated to .010 off the lands. The barrel and barrel nut are also freefloated and the tang is aswell. Does anyone have any Ideas how I can fix this. Thanks.</p></blockquote><p></p>
[QUOTE="cmorsch, post: 846165, member: 59422"] Im having issues tracking down a issue with the accuracy Im getting with a build I did off of my Savage 111. I am consistently getting 2 flyers approx. to the left during my load development, but the other 3 shots are all within .5 moa and am having a tough time figuring out what is causing it. The Flyers open the group up to 1.1-1.2 moa. The rifle specs are a shilen stainless match 1-10 twist 26" varmint contour, competition recoil lug and barrel nut, rifle basix trigger, the action was timed by stockade gun works as well as bedding the rifle to one of their stocks. Im currently working with a load of a 200gr accubond with 53 grains of imr4350 Winchester brass and a CCI200 primer seated to .010 off the lands. The barrel and barrel nut are also freefloated and the tang is aswell. Does anyone have any Ideas how I can fix this. Thanks. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Accuracy issue with semi-custom Savage 30-06
Top