Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
A-Tips, terminal performance on big game
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="dgogogomez" data-source="post: 2346071" data-attributes="member: 119124"><p>Thanks. </p><p></p><p>Factory Browning X-Bolt Hells Canyon LR, 26" barrel, 1:8 twist</p><p>Sierra brass, 92.9gr H2O</p><p>Federal 215 primers (non-match)</p><p>78.6gr IMR 8133 (will be switching due to non-availability)</p><p>.01" or .138"(for mag feed) OTL, similar MVs</p><p>100+ measurements with Caldwell crono, have not confirmed with another crono yet but no reason to believe it's far off. </p><p></p><p>It's a hot load, so careful. Stiff bolt at 80gr. I've gotten about 13 firings out of the brass and now they're done. I've done preliminary load development with N570 and Nosler brass, similar MV with about 79.5gr. Still working on accuracy and getting SD down with brass prep and shooting skills. </p><p></p><p>This forum has really helped me with load development. I'm still learning so let me know if you have any comments or suggestions. Thanks.</p></blockquote><p></p>
[QUOTE="dgogogomez, post: 2346071, member: 119124"] Thanks. Factory Browning X-Bolt Hells Canyon LR, 26” barrel, 1:8 twist Sierra brass, 92.9gr H2O Federal 215 primers (non-match) 78.6gr IMR 8133 (will be switching due to non-availability) .01” or .138”(for mag feed) OTL, similar MVs 100+ measurements with Caldwell crono, have not confirmed with another crono yet but no reason to believe it’s far off. It’s a hot load, so careful. Stiff bolt at 80gr. I’ve gotten about 13 firings out of the brass and now they’re done. I’ve done preliminary load development with N570 and Nosler brass, similar MV with about 79.5gr. Still working on accuracy and getting SD down with brass prep and shooting skills. This forum has really helped me with load development. I’m still learning so let me know if you have any comments or suggestions. Thanks. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
A-Tips, terminal performance on big game
Top