Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
A moron and his uni-throater...
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Terry Balding" data-source="post: 2564263" data-attributes="member: 75367"><p>The Uni Throater needs to be adjusted to cut. Back off the adjustment ring and lock rung. Slide the sleeve forward. Place in chamber. The sleeve will slide back and stop. This is your Zero. Only cut a very little at a time. Maybe. 010 . The adjustment ring is marked in thousands. Turn the ring toward the sleeve. Stop when you touch. Back off .010 and make your first cut. Cover the cutting surface with a light greese. It will retain the chips with the cutter. Clean off cutter, adjust and repeat till your dummy fits. Later cuts may need to be smaller to get the fit that you want.</p></blockquote><p></p>
[QUOTE="Terry Balding, post: 2564263, member: 75367"] The Uni Throater needs to be adjusted to cut. Back off the adjustment ring and lock rung. Slide the sleeve forward. Place in chamber. The sleeve will slide back and stop. This is your Zero. Only cut a very little at a time. Maybe. 010 . The adjustment ring is marked in thousands. Turn the ring toward the sleeve. Stop when you touch. Back off .010 and make your first cut. Cover the cutting surface with a light greese. It will retain the chips with the cutter. Clean off cutter, adjust and repeat till your dummy fits. Later cuts may need to be smaller to get the fit that you want. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
A moron and his uni-throater...
Top