Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
A few simple questions
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="ATH" data-source="post: 107443" data-attributes="member: 1656"><p>I set up my new gear and loaded my first rounds today. This led to a few questions.</p><p>1) I couldn't get a 300WM case for the SP gauge, so I didn't get one. Instead I seated the first round long, checking it in the chamber, and then screwing the die in a few thousandths more. The rifling seemed to be at 2.0970" OAL (base-to-bearing surface), so I seated the rounds at 2.0960" just to be safe. Sound safe/acceptable?</p><p>2) I just neck-sized new cases this time; when it's time to full-size and push the shoulders back, how is this best measured, and how far should I push it back (I have a Lee collet die set).</p><p>3) This time I used Winchester brass; I also have a bag of once-fired (in my gun) Remington brass. Is any loading data transferrable across cases, or would I have to work up the load from scratch in each brand of brass?</p><p>4) I set up a box to work a load with 200gr Accubonds; I also want to shoot 200gr SMK at as close to the same ballistics as possible. Is any of the knowledge gained from working up one load transferrable to the other, or do I work them up completely independently (including ladder test?).</p><p>5) I set up a ladder test with Re22 from 68.6-73.5gr in .3gr increments. What range should I shoot this at?</p><p></p><p>Thanks for the help...I am eager to shoot my first handloads this weekend (the ladder test). I'm pleased I can load close to the lands and still use the mag in my factory gun...</p></blockquote><p></p>
[QUOTE="ATH, post: 107443, member: 1656"] I set up my new gear and loaded my first rounds today. This led to a few questions. 1) I couldn't get a 300WM case for the SP gauge, so I didn't get one. Instead I seated the first round long, checking it in the chamber, and then screwing the die in a few thousandths more. The rifling seemed to be at 2.0970" OAL (base-to-bearing surface), so I seated the rounds at 2.0960" just to be safe. Sound safe/acceptable? 2) I just neck-sized new cases this time; when it's time to full-size and push the shoulders back, how is this best measured, and how far should I push it back (I have a Lee collet die set). 3) This time I used Winchester brass; I also have a bag of once-fired (in my gun) Remington brass. Is any loading data transferrable across cases, or would I have to work up the load from scratch in each brand of brass? 4) I set up a box to work a load with 200gr Accubonds; I also want to shoot 200gr SMK at as close to the same ballistics as possible. Is any of the knowledge gained from working up one load transferrable to the other, or do I work them up completely independently (including ladder test?). 5) I set up a ladder test with Re22 from 68.6-73.5gr in .3gr increments. What range should I shoot this at? Thanks for the help...I am eager to shoot my first handloads this weekend (the ladder test). I'm pleased I can load close to the lands and still use the mag in my factory gun... [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
A few simple questions
Top