Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
7mm STW Cases Stuck After Firing
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="MagnumManiac" data-source="post: 2415109" data-attributes="member: 10755"><p>The case is supposed to be .512" above the belt….new brass is undersize.</p><p>If it were caused by a bulge, there would be witness marks of the brass being scrubbed off as the bolt is rotated.</p><p>If the bolt timing is off, your symptom is exactly what happens because the primary extraction is not pulling the case out far enough to break the seal. With the bolt closed, look to see how much gap there is between the action body and the bolt handle. If it is larger than .020" you have a problem.</p><p></p><p>Cheers.</p></blockquote><p></p>
[QUOTE="MagnumManiac, post: 2415109, member: 10755"] The case is supposed to be .512” above the belt….new brass is undersize. If it were caused by a bulge, there would be witness marks of the brass being scrubbed off as the bolt is rotated. If the bolt timing is off, your symptom is exactly what happens because the primary extraction is not pulling the case out far enough to break the seal. With the bolt closed, look to see how much gap there is between the action body and the bolt handle. If it is larger than .020” you have a problem. Cheers. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
7mm STW Cases Stuck After Firing
Top