Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
7mm sherman max
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="codyadams" data-source="post: 2056857" data-attributes="member: 87243"><p>I have no experience with it, I would assume it will be similar to the 3.990" boxes you see in most of the edges built, most people don't complain about those. </p><p></p><p>I know what you mean on the remingtons, I added up everything I did on my last build, the action itself, bolt flutting, time/tig bolt handle, true up action, open up for a 3.850" mag box, install an m16 extractor, open up bolt face, thread for #8 base screws, and after all was said and done I came up $75 short of what a basic Defiance would have cost me. Uhg. If I wouldn't have had primary extraction issues and needed the bolt time/tiged, I would have been about $300 ahead, but still. If you have a proven action and are just gonna add a mag box and new barrel, that's a good deal. Starting from scratch?? Better to get a budget custom in my opinion. Ol well....</p></blockquote><p></p>
[QUOTE="codyadams, post: 2056857, member: 87243"] I have no experience with it, I would assume it will be similar to the 3.990" boxes you see in most of the edges built, most people don't complain about those. I know what you mean on the remingtons, I added up everything I did on my last build, the action itself, bolt flutting, time/tig bolt handle, true up action, open up for a 3.850" mag box, install an m16 extractor, open up bolt face, thread for #8 base screws, and after all was said and done I came up $75 short of what a basic Defiance would have cost me. Uhg. If I wouldn't have had primary extraction issues and needed the bolt time/tiged, I would have been about $300 ahead, but still. If you have a proven action and are just gonna add a mag box and new barrel, that's a good deal. Starting from scratch?? Better to get a budget custom in my opinion. Ol well.... [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
7mm sherman max
Top