Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
7 STW brass wont chamber
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Pdvdh" data-source="post: 284257" data-attributes="member: 4191"><p>If the belt extends too far froward from the case head, there's not a thing you could do that would be worth the time and/or money doing. You'd either have to change your chamber headspace to match these defective brass, which would be nutzo, or correct the faulty brass by turning back the front edge of the belts to a proper length on a lathe or some other custom tooling set-up. And that wouldn't be worth the time, even if you owned or had access to your own customized lathe turning equipment and did the work yourself. </p><p></p><p>The cases would only have value to someone who might have a chamber with headspace set long enough to accept these *** cases.</p></blockquote><p></p>
[QUOTE="Pdvdh, post: 284257, member: 4191"] If the belt extends too far froward from the case head, there's not a thing you could do that would be worth the time and/or money doing. You'd either have to change your chamber headspace to match these defective brass, which would be nutzo, or correct the faulty brass by turning back the front edge of the belts to a proper length on a lathe or some other custom tooling set-up. And that wouldn't be worth the time, even if you owned or had access to your own customized lathe turning equipment and did the work yourself. The cases would only have value to someone who might have a chamber with headspace set long enough to accept these *** cases. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
7 STW brass wont chamber
Top