Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5x55
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Sjspin" data-source="post: 1642136" data-attributes="member: 108308"><p>RL 26 will give you the speed. However, in my rifles, I had to back down to get the accuracy node. It's still faster than other powders, but not more accurate for those rifles. </p><p></p><p>In my experience, you need to watch the speeds. It can take off on you in a hurry. I couldn't even approach top loads without it exceeding predicted speeds quickly. You can hear it when it gets up there. The report sounds very different and the magneto verified extreme speeds. It's a wonder powder, but I think you could get into trouble if you aren't watching it. </p><p></p><p>I called Nosler to discuss my experience with the 140 grain Accubonds. They varied my findings. Great load, but h4831sc was more consistent. I would get strange fliers that would be 2" out from the group. It certainly could be my reloading, but I don't get the fliers with h4831. I attributed that to increased neck tension and an increase in pressure. Either way, I'll use the load, but not for mid range.</p></blockquote><p></p>
[QUOTE="Sjspin, post: 1642136, member: 108308"] RL 26 will give you the speed. However, in my rifles, I had to back down to get the accuracy node. It’s still faster than other powders, but not more accurate for those rifles. In my experience, you need to watch the speeds. It can take off on you in a hurry. I couldn’t even approach top loads without it exceeding predicted speeds quickly. You can hear it when it gets up there. The report sounds very different and the magneto verified extreme speeds. It’s a wonder powder, but I think you could get into trouble if you aren’t watching it. I called Nosler to discuss my experience with the 140 grain Accubonds. They varied my findings. Great load, but h4831sc was more consistent. I would get strange fliers that would be 2” out from the group. It certainly could be my reloading, but I don’t get the fliers with h4831. I attributed that to increased neck tension and an increase in pressure. Either way, I’ll use the load, but not for mid range. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5x55
Top