Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
6.5x47 to 6.5-06
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="John Klingenberg" data-source="post: 2057398" data-attributes="member: 107749"><p>You'll almost certainly need to set the shoulder back for a standard 6.5-06. If my memory serves correctly the lapua is slightly larger at a point than the taper in a standard case. You'll get an odd step ring in your fired brass if you dont clean it up. Like when rechambering a .308 to 30-06. The reamer wont quite clean up a 308 chamber so you have to set it back. I believe the ai chamber wouldn't require that. I'd look at the spec drawings to make sure your rented, bought reamer will clean up that lapua chamber</p><p></p><p>Edit: some roughing reamers can be used to make dies. Check with your reamer seller.</p></blockquote><p></p>
[QUOTE="John Klingenberg, post: 2057398, member: 107749"] You'll almost certainly need to set the shoulder back for a standard 6.5-06. If my memory serves correctly the lapua is slightly larger at a point than the taper in a standard case. You'll get an odd step ring in your fired brass if you dont clean it up. Like when rechambering a .308 to 30-06. The reamer wont quite clean up a 308 chamber so you have to set it back. I believe the ai chamber wouldn't require that. I'd look at the spec drawings to make sure your rented, bought reamer will clean up that lapua chamber Edit: some roughing reamers can be used to make dies. Check with your reamer seller. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
6.5x47 to 6.5-06
Top