Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
6.5x284 tikka build
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="highdrum" data-source="post: 2440537" data-attributes="member: 13732"><p>My 6.5x284 is a ca ridgeline, new saami spec fb of 0.299 which is a mile long. 156s touching are half way up the neck. I run them 40k off lands whith 54.2gr rl26 @ 2955 fps, one hole at 100y 1" at 400y for 3 shot groups. The saami reamer has same neck diameter as the norma match above. My lapua brass necks were tighter than I liked so neck turned for 292 loaded diameter. I use a forster fl non bushing die, 262 expander mandrel for 0025 neck tension. Also have a set of redding type s fl die/seater. I utilize only the seater currently. My tight neck issue may habe completely been due to Christensen using the reamer for too many cuts and could have been getting under sized from dulling/wear.</p></blockquote><p></p>
[QUOTE="highdrum, post: 2440537, member: 13732"] My 6.5x284 is a ca ridgeline, new saami spec fb of 0.299 which is a mile long. 156s touching are half way up the neck. I run them 40k off lands whith 54.2gr rl26 @ 2955 fps, one hole at 100y 1" at 400y for 3 shot groups. The saami reamer has same neck diameter as the norma match above. My lapua brass necks were tighter than I liked so neck turned for 292 loaded diameter. I use a forster fl non bushing die, 262 expander mandrel for 0025 neck tension. Also have a set of redding type s fl die/seater. I utilize only the seater currently. My tight neck issue may habe completely been due to Christensen using the reamer for too many cuts and could have been getting under sized from dulling/wear. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
6.5x284 tikka build
Top