Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
6.5x284 Norma reamer from PTG
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Edd" data-source="post: 1144653" data-attributes="member: 30592"><p>If you want to seat a 140 gr Berger VLD hunting bullet where the back of the bullet bearing surface is even with the neck/shoulder junction and the front of the bearing surface is .020" off of the lands, you will need the PTG drawing measurement from the bolt face to the front of the lead to be about 2.352". This will give you an OAL of about 3.083".</p><p></p><p>The CIP spec is 2.496" and 3.228".</p></blockquote><p></p>
[QUOTE="Edd, post: 1144653, member: 30592"] If you want to seat a 140 gr Berger VLD hunting bullet where the back of the bullet bearing surface is even with the neck/shoulder junction and the front of the bearing surface is .020" off of the lands, you will need the PTG drawing measurement from the bolt face to the front of the lead to be about 2.352". This will give you an OAL of about 3.083". The CIP spec is 2.496" and 3.228". [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
6.5x284 Norma reamer from PTG
Top