Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5 PRC Over pressure with H1000 and 156 Bergers
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="vancewalker007" data-source="post: 2240280" data-attributes="member: 66917"><p>Be careful with any case that has an ejector mark on it. I have found with Hornady brass and the Hornady Match FL sizer that the web area of cases exposed to over pressure will not size back down to 0.532 or less. I think you'll find even 0.5325 will close snug in your rifle if you have a SAAMI chamber. I have also found that bumping 4-5 thou instead of the typical 2 thou seems to get most cases back into working size pretty consistently. I've just started tossing anything that will not close smoothly in my rifle. I've have several snug closers that overpressured with loads well below my rifle's pressure point.</p></blockquote><p></p>
[QUOTE="vancewalker007, post: 2240280, member: 66917"] Be careful with any case that has an ejector mark on it. I have found with Hornady brass and the Hornady Match FL sizer that the web area of cases exposed to over pressure will not size back down to 0.532 or less. I think you'll find even 0.5325 will close snug in your rifle if you have a SAAMI chamber. I have also found that bumping 4-5 thou instead of the typical 2 thou seems to get most cases back into working size pretty consistently. I've just started tossing anything that will not close smoothly in my rifle. I've have several snug closers that overpressured with loads well below my rifle's pressure point. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
6.5 PRC Over pressure with H1000 and 156 Bergers
Top