Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
6.5 PRC over pressure signs
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="PatriotHenry" data-source="post: 2391881" data-attributes="member: 114356"><p>Rocketeer,</p><p></p><p>I should have expanded a little on the oil in bore, as has been mentioned since. ALWAYS clean your chamber also of any excess oil or cleaners. I dry patch the bore several passes then I clean the chamber with a bore mop saturated with non chlorinated brake cleaner and let dry muzzle up or bore slightly above level. This only takes a few minutes and no residue. Lots of other good comments in the thread.</p><p></p><p>Good luck moving forward.</p></blockquote><p></p>
[QUOTE="PatriotHenry, post: 2391881, member: 114356"] Rocketeer, I should have expanded a little on the oil in bore, as has been mentioned since. ALWAYS clean your chamber also of any excess oil or cleaners. I dry patch the bore several passes then I clean the chamber with a bore mop saturated with non chlorinated brake cleaner and let dry muzzle up or bore slightly above level. This only takes a few minutes and no residue. Lots of other good comments in the thread. Good luck moving forward. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
6.5 PRC over pressure signs
Top